View PS2701-1Y-F3-A-P_3819260.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

data sheet the information in this document is subject to change without notice. before using this document, please confirm that this is the latest version. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. high isolation voltage sop multi photocoupler ? nepoc series ? document no. pn10240ej03v0ds (3rd edition) date published december 2008 ns printed in japan 1988, 2008 photocoupler ps2701-1 the mark shows major revised points. the revised points can be easily s earched by copying an "" in the pdf file and specifying it in the "find what:" field. description the ps2701-1 is an optically coupled isolator containing a gaas li ght emitting diode and an npn silicon phototransistor. this package is sop (small outline package) type and has shield effect to cut off ambient light. it is designed for high density mounting applications. features ? high isolation voltage (bv = 3 750 vr.m.s.) ? sop (small outline package) type ? high-speed switching (t r = 3 s typ., t f = 5 s typ.) ? ordering number of taping product: ps2701-1-f3, f4 ? safety standards ? ul approved: no. e72422 ? bsi approved: no. 8219/8220 ? csa approved: no. ca 101391 ? din en60747-5-2 (vde0884 part2) approved: no. 40008902 (option) applications ? hybrid ic ? measuring instruments ? power supply ? programmable logic controllers pin connection (top view) 1. anode 2. cathode 3. emitter 4. collector 43 12
data sheet pn10240ej03v0ds 2 ps2701-1 package dimensions (in millimeters) 4.00.5 7.00.3 4.4 0.50.3 0.15 +0.10 ?0.05 2.0 0.10.1 2.10.2 2.54 0.4 +0.10 ?0.05 0.25 m marking example pb-free special version (pb-free and halogen free) 2701 m831 trade mark type number assembly lot no. 1 pin mark m8 31 week assembled year assembled (last 1 digit) ctr rank name *1 bar: pb-free remark "ps" and "-1" are omitted from original type number *1 2701 m831 trade mark type number assembly lot no. 1 pin mark m831 week assembled year assembled (last 1 digit) ctr rank name *1 bar: pb-free and halogen free remark "ps" and "-1" are omitted from original type number *1
data sheet pn10240ej03v0ds 3 ps2701-1 ordering information part number order number solder plating specification packing style safety standard approval application part number *1 ps2701-1 ps2701-1-a pb-free magazine ca se 100 pcs standard products ps2701-1 ps2701-1-f3 ps2701-1-f3-a embossed tape 3 500 pcs/reel (ul, bsi, csa ps2701-1-f4 ps2701-1-f4-a approved) ps2701-1-v ps2701-1-v-a magazine case 100 pcs din en60747-5-2 ps2701-1-v-f3 ps2701-1-v-f3-a embossed tape 3 500 pcs/reel (vde0884 part2) ps2701-1-v-f4 ps2701-1-v-f4-a approved (option) ps2701-1 ps2701-1y-a special version magazi ne case 100 pcs standard products ps2701-1 ps2701-1-f3 ps2701-1y-f3-a (pb-free and emboss ed tape 3 500 pcs/reel (ul, bsi, csa halogen free) approved) ps2701-1-v ps2701-1y-v-a magazine case 100 pcs din en60747-5-2 ps2701-1-v-f3 ps2701-1y-v-f3-a embossed tape 3 500 pcs/reel (vde0884 part2) approved (option) *1 for the application of the safety st andard, following part number should be used.
data sheet pn10240ej03v0ds 4 ps2701-1 absolute maximum ratings (t a = 25 c, unless otherwise specified) parameter symbol ratings unit diode forward current (dc) i f 50 ma reverse voltage v r 6 v power dissipation derating p d / c 0.8 mw/ c power dissipation p d 80 mw peak forward current *1 i fp 1 a transistor collector to emitter voltage v ceo 40 v emitter to collector voltage v eco 6 v collector current i c 80 ma power dissipation derating p c / c 1.5 mw/ c power dissipation p c 150 mw isolation voltage *2 bv 3 750 vr.m.s. operating ambient temperature t a ?55 to +100 c storage temperature t stg ?55 to +150 c *1 pw = 100 s, duty cycle = 1% *2 ac voltage for 1 minute at t a = 25 c, rh = 60% between input and output pins 1-2 shorted toget her, 3-4 shorted together.
data sheet pn10240ej03v0ds 5 ps2701-1 electrical characteristics (t a = 25 c) parameter symbol conditions min. typ. max. unit diode forward voltage v f i f = 5 ma 1.1 1.4 v reverse current i r v r = 5 v 5 a terminal capacitance c t v = 0 v, f = 1 mhz 30 pf transistor collector to emitter dark current i ceo i f = 0 ma, v ce = 40 v 100 na coupled current transfer ratio (i c /i f ) *1 ctr i f = 5 ma, v ce = 5 v 50 100 300 % collector saturation voltage v ce (sat) i f = 10 ma, i c = 2 ma 0.3 v isolation resistance r i-o v i-o = 1 kv dc 10 11 isolation capacitance c i-o v = 0 v, f = 1 mhz 0.4 pf rise time *2 t r v cc = 5 v, i c = 2 ma, r l = 100 3 s fall time *2 t f 5 *1 ctr rank p: 150 to 300 (%) l: 100 to 300 (%) m: 50 to 150 (%) *2 test circuit for switching time pw = 100 s, duty cycle = 1/10 pulse input v cc v out r l = 100 50 i f input output 90% 10% t r t d t f t s t on t off
data sheet pn10240ej03v0ds 6 ps2701-1 typical characteristics (t a = 25 c, unless otherwise specified) 100 50 25 0 75 25 50 75 100 ambient temperature t a ( c) diode power dissipation p d (mw) diode power dissipation vs. ambient temperature 200 150 100 50 0 25 50 75 100 ambient temperature t a ( c) transistor power dissipation p c (mw) transistor power dissipation vs. ambient temperature 1.5 mw/ c 50 20 0 40 30 10 610 24 8 collector to emitter voltage v ce (v) collector current i c (ma) collector current vs. collector to emitter voltage i f = 30 ma 20 ma 10 ma 15 ma 5 ma 100 0.1 1 0.01 10 0.6 1.0 1.4 1.6 0.8 1.2 forward voltage v f (v) forward current i f (ma) forward current vs. forward voltage +25 c 0 c ?25 c ?55 c t a = +100 c +75 c +50 c 10 000 0.1 100 1 000 10 1 ?60 0 40 80 ?40 ?20 20 60 100 ambient temperature t a ( c) collector to emitter dark current vs. ambient temperature collector to emitter dark current i ceo (na) v ce = 40 v 24 v 10 v 50 5 0.1 10 0.5 0.2 20 2 1 0.2 0.6 1.0 0.0 0.4 0.8 collector saturation voltage v ce (sat) (v) collector current i c (ma) collector current vs. collector saturation voltage i f = 25 ma 10 ma 5 ma 2 ma 1 ma remark the graphs indicate nominal characteristics.
data sheet pn10240ej03v0ds 7 ps2701-1 1.2 0.6 0.0 0.8 1.0 0.4 0.2 025 50 100 ?50 ?25 75 ambient temperature t a ( c) normalized current transfer ratio vs. ambient temperature normalized current transfer ratio ctr normalized to 1.0 at t a = 25 c, i f = 5 ma, v ce = 5 v 300 250 150 50 0 200 100 0.05 0.5 5 50 0.1 1 10 forward current i f (ma) current transfer ratio ctr (%) current transfer ratio vs. forward current v ce = 5 v load resistance r l ( ) switching time vs. load resistance switching time t ( s) v cc = 5 v, i c = 2 ma 100 0.5 0.1 50 10 5 1 50 200 1 k 2 k 100 500 load resistance r l ( ) switching time vs. load resistance switching time t ( s) t on t off t d t s 1.2 0.4 0.0 0.8 0.6 0.2 1.0 20 500 5 10 200 2 50 100 frequency f (khz) normalized gain g v frequency response r l = 1 k 510 300 100 1.2 1.0 0.0 0.4 0.2 0.8 0.6 10 2 10 3 110 4 10 5 10 6 time (hr) long term ctr degradation ctr (relative value) i f = 1 ma, t a = 25 c i f = 5 ma, t a = 25 c i f = 20 ma, t a = 25 c i f = 20 ma, t a = 60 c i f = 5 ma, v cc = 5 v, ctr = 169% 1 000 0.5 100 500 10 1 50 5 0.1 100 1 k 10 k 50 k 500 5 k 100 k t f t s t r t d remark the graphs indicate nominal characteristics.
data sheet pn10240ej03v0ds 8 ps2701-1 taping specifications (in millimeters) tape direction outline and dimensions (reel) packing: 3 500 pcs/reel 2.00.5 r 1.0 13.00.2 21.00.8 3302.0 1001.0 2.0 0.5 11.9 to 15.4 outer edge of flange 17.51.0 13.51.0 13.00.2 ps2701-1-f3 ps2701-1-f4 1.550.1 2.00.05 4.00.1 1.750.1 4.60.1 2.9 max. 0.3 8.00.1 outline and dimensions (tape) 2.40.1 1.5 +0.1 ?0 7.40.1 5.50.05 12.00.2
data sheet pn10240ej03v0ds 9 ps2701-1 notes on handling 1. recommended soldering conditions (1) infrared reflow soldering ? peak reflow temperature 260 c or below (package surface temperature) ? time of peak reflow temperature 10 seconds or less ? time of temperature higher than 220 c 60 seconds or less ? time to preheat temperature from 120 to 180 c 120 30 s ? number of reflows three ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) 12030 s (preheating) 220 c 180 c package surface temperature t ( c) time (s) recommended temperature profile of infrared reflow (heating) to 10 s to 60 s 260 c max. 120 c (2) wave soldering ? temperature 260 c or below (molten solder temperature) ? time 10 seconds or less ? preheating conditions 120 c or below (package surface temperature) ? number of times one (allowed to be dipped in solder including plastic mold portion.) ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (3) soldering by soldering iron ? peak temperature (l ead part temperature) 350 c or below ? time (each pins) 3 seconds or less ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (a) soldering of leads should be made at the poi nt 1.5 to 2.0 mm from the root of the lead. (b) please be sure that the temperatur e of the package woul d not be heated over 100 c.
data sheet pn10240ej03v0ds 10 ps2701-1 (4) cautions ? fluxes avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. cautions regarding noise be aware that when voltage is applied suddenly bet ween the photocoupler?s i nput and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. 3. measurement conditions of current transfer ra tios (ctr), which differ according to photocoupler check the setting values before use, since the forward current conditions at ctr measurement differ according to product. when using products other than at the specified forward current, the char acteristics curves may differ from the standard curves due to ctr value vari ations or the like. this tendency may sometimes be obvious, especially below i f = 1 ma. therefore, check the charac teristics under the actual operating conditi ons and thoroughly take variations or the like into consideration before use. usage cautions 1. protect against static electricity when handling. 2. avoid storage at a high te mperature and high humidity.
data sheet pn10240ej03v0ds 11 ps2701-1 specification of vde marks license document parameter symbol spec. unit climatic test class (iec 60068-1/din en 60068-1) 55/110/21 dielectric strength maximum operating isolation voltage test voltage (partial discharge test, pr ocedure a for type test and random test) u pr = 1.5 u iorm , p d < 5 pc u iorm u pr 707 1 060 v peak v peak test voltage (partial discharge te st, procedure b fo r all devices) u pr = 1.875 u iorm , p d < 5 pc u pr 1 325 v peak highest permissible overvoltage u tr 6 000 v peak degree of pollution (din en 60664-1 vde0110 part 1) 2 clearance distance > 5.0 mm creepage distance > 5.0 mm comparative tracking index (iec 60112/din en 60112 (vde 0303 part 11)) cti 175 material group (din en 60664-1 vde0110 part 1) iii a storage temperature range t stg ?55 to +150 c operating temperature range t a ?55 to +110 c isolation resistance, minimum value v io = 500 v dc at t a = 25 c v io = 500 v dc at t a max. at least 100 c ris min. ris min. 10 12 10 11 safety maximum ratings (maximum permi ssible in case of fault, see thermal derating curve) package temperature current (input current i f , psi = 0) power (output or total power dissipation) isolation resistance v io = 500 v dc at t a = tsi tsi isi psi ris min. 150 300 500 10 9 c ma mw
data sheet pn10240ej03v0ds 12 ps2701-1 the information in this document is current as of december, 2008. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec electronics data sheets or data books, etc., for the most up-to-date specifications of nec electronics products. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec electronics. nec electronics assumes no responsibility for any errors that may appear in this document. nec elect ronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec electronics products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec electronics or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. nec electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec electronics endeavors to enhance the quality, reliability and safety of nec electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. nec electronics products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to nec electronics products developed based on a customer- designated "quality assurance program" for a specific application. the recommended applications of an nec electronics product depend on its quality grade, as indicated below. customers must check the quality grade of each nec electronics product before using it in a particular application. the quality grade of nec electronics products is "standard" unless otherwise expressly specified in nec electronics data sheets or data books, etc. if customers wish to use nec electronics products in applications not intended by nec electronics, they must contact an nec electronics sales representative in advance to determine nec electronics' willingness to support a given application. (note) ? ? ? ? ? ? m8e 02. 11-1 (1) (2) "nec electronics" as used in this statement means nec electronics corporation and also includes its majority-owned subsidiaries. "nec electronics products" means any product developed or manufactured by or for nec electronics (as defined above). computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "standard": "special": "specific":
ps2701-1 caution gaas products this product uses gallium arsenide (gaas). gaas vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. ? follow related laws and ordinanc es when disposing of the produc t. if there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. commission a disposal company able to (wit h a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. exclude the product from general industria l waste and household garbage, and ensure that the product is controlled (as industria l waste subject to special c ontrol) up until final disposal. ? do not burn, destroy, cut, crush, or chemically di ssolve the product. ? do not lick the product or in any way allow it to enter the mouth.

▲Up To Search▲

Price & Availability of PS2701-1Y-F3-A-P

	To Download PS2701-1Y-F3-A-P Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .